MMSOFT Design Pulseway User Manual page 54

Server Modules
After the SNMP agent configuration is complete you need to add the variables you wish to
monitor. You can add variables from the Edit Agent dialog inside the Variables tab.
In order to correctly identify each of the variable's type and usage you need to consult the
"SNMP MIB Reference Guide" released by the vendor of the agent. The MIB Document
contains information regarding each variable exposed by the SNMP agent.
It is possible to manually write the variable Oid (Object identifier) or using the crawl ("..."
button in the Add Variable dialog) feature.
Pulseway User Manual Page 54 of 85