Allowed System Commands; System Command Force Attribute - MMSOFT Design Pulseway User Manual

System Configuration

4.1.1. Allowed System Commands

Some system administrators would like to prevent hardware damage to the computers the
operator share access to and disable the Power Off command which is a hard shutdown that
can cause data loss.
By default all System Commands are enabled, however, you get the option to customize
their availability.
For example if you would like to allow only restart commands to be sent, just uncheck all
boxes except restart.

4.1.2. System Command Force Attribute

The force attribute forces the application to close so that you will know for sure that the
system will execute your command. This can cause loss of data if any opened application
contains unsaved data.
Pulseway User Manual Page 25 of 85