HIKVISION DS-2CD2012-I User Manual page 44

User Manual of Network Camera
Tasks:
1. Set the Motion Detection Area.
Steps:
(1) Enter the motion detection settings interface
Configuration > Advanced Configuration> Events > Motion Detection
(2) Check the checkbox of Enable Motion Detection.
(3) Click
motion detection area.
Note: You can draw up to 8 motion detection areas on the same image.
(4) Click
Note: You can click
(5) Move the slider
detection.
2. Set the Arming Schedule for Motion Detection.
Steps:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Enable Motion Detection
Figure 5-26
. Click and drag the mouse on the live video image to draw a
to finish drawing.
to clear all of the areas.
to set the sensitivity of the
43