HIKVISION DS-2CD2012-I User Manual page 27

User Manual of Network Camera
 Select the Time Zone.(Optional)
Select the Time Zone when you change your location of the camera.
 Configure the time synchronization by NTP Server or manually.
 Configuring Time Synchronization by NTP Server.
(1) Check the checkbox to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.
Note: If the camera is connected to a public network, you should use a NTP server
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Time Settings
Figure 5-2
Time Zone Settings
Figure 5-3
Time Sync by NTP Server
Figure 5-4
26