HP ProLiant DL785 Quickspecs page 16

QuickSpecs
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are NOTE: NOTE: NOTE:
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start NOTE: NOTE: NOTE:
with a CTO Chassis.
NOTE: NOTE: NOTE: This product offering does not support HP Factory Express Server Configuration Level 1. NOTE:
NOTE: FIO indicates that this option only available as a Factory Installable Option. NOTE: NOTE: NOTE:
Step 1: Base Configuration Step 1: Base Configuration Step 1: Base Configuration Step 1: Base Configuration
Models Models Models Models
Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted) noted) noted) noted)
Processors Processors Processors Processors
Base Memory Base Memory Base Memory Base Memory
Storage Controllers Storage Controllers Storage Controllers Storage Controllers
Upgrade Options Upgrade Options
Upgrade Options Upgrade Options
HP ProLiant DL785 G5 Rack CTO Chassis
Factory Integrated Models ship with: Factory Integrated Models ship with: Factory Integrated Models ship with: Factory Integrated Models ship with:
Two embedded NC371i Multifunction Gigabit Network Adapters
HP Smart Array P400i Controller
Integrated Lights-Out 2 (iLO 2) Standard management
Six (6) Redundant Hot Plug Fans
Three Hot Plug Power Supply
Rack 7U Form Factor
AMD Opteron™ 8354 2.2 GHz-2 MB Quad-Core Processor (75W) 4P Option Kit
NOTE: NOTE: NOTE: If eight processors are desired, select one 468121-L21 and one 468121- NOTE:
B21.
AMD Opteron™ 8356 2.3 GHz-2 MB Quad-Core Processor (75W) 4P Option Kit
NOTE: If eight processors are desired, select one 468120-L21 and one 468120- NOTE: NOTE: NOTE:
B21.
8 GB REG PC2-5300 (2 x 4 GB) Kit, dual rank
4 GB PC2-5300 DDR2 (2 x 2 GB) Kit, dual rank
2 GB PC2-5300 DDR2 (2 x 1 GB) Kit, single rank
NOTE: NOTE: A minimum of two DIMMs (1 kit) must be installed per processor. NOTE: NOTE:
NOTE: Memory must be ordered in like-pairs, i.e. two of the same size. NOTE: NOTE: NOTE:
NOTE: NOTE: NOTE: If all four banks on a memory node are populated, the maximum memory NOTE:
clock speed will be 533 MHz. If two or fewer banks on a memory node are
populated, the maximum memory clock speed will be 667 MHz.
HP Smart Array P400 256MB FIO Cache
NOTE: Supports Smart Array P400 Controller and Smart Array P400i Controller only. NOTE:
NOTE: NOTE:
512MB Battery-backed write cache upgrade
DA - 13046 Worldwide — Version 4 — May 21, 2008
HP ProLiant DL785 Generation 5 (G5) HP ProLiant DL785 Generation 5 (G5) HP ProLiant DL785 Generation 5 (G5) HP ProLiant DL785 Generation 5 (G5)
AH233A
468121-L21
468120-L21
408854-B21
408853-B21
408851-B21
405139-B21
405148-B21
Page 16