Storage Controller Option - HP PROLIANT DL320 G6 User Manual

Remove the PCIe riser board from the assembly.
7.
Install the optional PCI-X riser board.
8.
Install a PCI-X expansion board
9.
IMPORTANT:
properly.
Install the PCI riser board assembly (on page 18).
10.
Connect all internal cables for expansion boards.
11.
Install the access panel.
12.
Install the server into the rack.
13.

Storage controller option

IMPORTANT:
documentation that ships with the option.
To install the component:
Power down the server (on page 16).
1.
Remove the server from the rack (on page 16).
2.
Remove the access panel (on page 17).
3.
Remove the air baffle (on page 17).
4.
Remove the PCI riser board assembly (on page 17).
5.
Remove the hard drive cables.
6.
Install the storage controller
7.
("Expansion board
The server does not power up if the PCI riser board assembly is not seated
For additional installation and configuration information, refer to the
("Expansion board
option" on page 38).
option" on page 38).
Hardware options installation 40