7.1.7 Running a Maintenance Program
You can run maintenance programs such as RAID and other configuration utilities
directly from the AlphaBIOS utility menu.
To run a maintenance program:
1. Start AlphaBIOS Setup, select Utilities, select Run Maintenance Program from
the submenu shown in Figure 7–3, and press Enter.
Figure 7–3 Run Maintenance Program Submenu
Display System Configuration...
Upgrade AlphaBIOS
Hard Disk Setup...
CMOS Setup...
Install Windows NT
Utilities
About AlphaBIOS
Insert the floppy containing EISA Configuration Utility (ECU) and
press ENTER to run it.
ESC=Exit
2. In the Run Maintenance Program dialog box, type the name of the program to be
run at the Program Name prompt, as shown in Figure 7–4. Then tab to the Loca-
tion listbox and select the hard-disk partition, floppy diskette, or CD-ROM drive
from which to run the program.
3.
Press Enter to execute the program.
AlphaBIOS Setup
Run ECU floppy...
OS Selection Setup...
Run Maintenance Program...
F1=Help
FM-05955.AI4
Configuring for Windows NT
AlphaBIOS
7–7