Do not place the AVR in moist or humid locations, in extremely hot or cold locations, in areas For more detailed speaker placement information, including the use of front near heaters or heat registers, or in direct sunlight. height speakers, download the complete AVR 156 Owner’s Manual from www.harmankardon.com. Connections CAUTION: Before making any connections to the audio/video receiver, ensure that the AVR's AC cord is unplugged from the AVR and the AC outlet.
AVR 156 Connections Connect Your Speakers Connect Your Subwoofer Use a single RCA audio cable to connect the AVR's Subwoofer Pre-Out connector to your How to use the AVR's speaker terminals: subwoofer. Consult your subwoofer’s user manual for specific information about making connections to it.
AVR 156 Connections Connect Your Audio and Video Source Devices Source devices are components where a playback signal originates, e.g., a Blu-ray As you connect your various source components, fill out the “Source Device Connected” Disc™ or DVD player; a cable, satellite or HDTV tuner; etc. Your AVR has several different column in the following table –...
Page 5
AVR 156 Connections Composite Video Devices Analog Audio Devices You will need to make composite video connections from your source devices that do not Make analog audio connections from your source devices that do not have HDMI or digital have HDMI or component video connections. You will also need to connect the source audio connections.
NOTE: For instructions on connecting the Trigger output to compatible equipment, please Press the remote control’s OSD button. The AVR’s on-screen display (OSD) Master download the AVR 156 Owner’s Manual from www.harmankardon.com. Menu will appear on the TV. MASTER MENU Connect to AC Power Connect the AC power cord to the AVR’s AC Input connector and then to a working,...
“Back To Master Menu.” MASTER MENU For now you can skip the “Sub Mode” and “Crossover” settings. For complete details about making these settings, please download the AVR 156 Owner’s Manual from www. harmankardon.com. INPUT SETUP Measure the distance from each speaker in your system to the listening position. Write SURROUND SELECT down the distances.