IMS-9000 User's Manual
PC Connector – DB9F
The PC connector allows a direct connection to a PC serial communication port via a
standard straight-through wired serial extension cable.
Telephone Connectors – RJ11
CAUTION: TO REDUCE THE RISK OF FIRE, USE NO.26AWG OR LARGER
TELECOMMUNICATION LINE CORD.
Line
The Line connector is used to connect the IMS9000 to the telephone line via a standard
telephone cord (supplied).
Phone
This Phone connector allows a telephone, fax, or other telecom device access to the
telephone line when the IMS9000 internal modem is not being used.
th
Note: The IMS9000 is preset at the factory to answer on the 4
ring.
POS Connector
The POS connector allows a direct connection to the Point Of Sale terminal serial
communication port via a standard straight-through wired serial extension cable.
Power Input Connector
The Power Input connector accepts power from the AC Power Adapter (supplied).
CAUTION: ONLY USE THE AC POWER ADAPTER PROVIDED WITH YOUR
IMS9000.
OCS Connector
The Order Confirmation System is connected to the OCS connector using the serial I/O
cable supplied with the OCS equipment. The I/O cable is terminated with a female DB9
connector. The OCS connector supports both RS232C and RS422 serial
communication standards and is optically isolated to protect all connected equipment.
Notice: No part of this document may be reproduced, copied or distributed without
Page 8
written permission from Delphi Display Systems, INC.
Copyright ©2000. [Unpublished Work]. All rights reserved.