BandLuxe R529 User Manual page 58

Q: What should be noted when 802.11n is selected?
A: For higher data transfer throughput, ensure that the router is not
configured to use WEP or TKIP
A: Is there any limitation for the WPS function?
Q: If you want to use WPS function, make sure that the router is not
configured to use WEP as its encryption in Basic WiFi Netwok >
Security Type Setup.
Q: Why can't I use the Router in the office?
A: Your Router's IP address might be in conflict with the office default
settings.
Q: Why is my internet speed so slow with Router?
A: 1. You can check the GUI Status > Signal Quality, the Rx Signal
Strength. If the footstep is too low it means the signal is too weak.
2. You can go to the GUI WiFi > Basic WiFi Network, change the
Standard Channel to others then save.
57
Appendix A: FAQ