Ethernet Setting - BandLuxe R529 User Manual

Internet Setup
Roaming Connection
To allow roaming network connection, select Enabled. To block roaming
connection, select Disabled.
Note: Rates for roaming can be very high. Contact your mobile network
operator for rates and more information.
APN Setting
The APN (Access Point Name) is provided by your mobile network
operator. You can choose to set the APN automatically or manually. In
most cases, the Router works properly when the APN is set to Auto.
To set the APN manually, contact your mobile network operator for the
APN, User Name and Password of the data service.
Authentication Type
Select the type of authentication protocol used by your mobile network
operator for data connections.

Ethernet Setting

Automatic Configuration - DHCP
Choose Dynamic IP Address to obtain IP Address information
automatically from your ISP. Select this option if your ISP does not give
you any IP numbers to use. This option is commonly used for cable
modem services.
PPPoE
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a
PPPoE connection. Your ISP will provide you with a username and
17