Advertisement
8.
9.
10.
11
12
13
11.
Rear Panel
12.
Power LED
Illuminates when AC power is being supplied to the unit.
Activity LED
Indicates output level from the master mixing stage. The LED illuminates when signal level
is approximately 25 dB below rated output.
Power Switch
Depress to ON position to turn on.
AC Outlet (unswitched)
Provides AC power for auxiliary equipment with a power consumption of no more than 300
watts. Using this outlet for equipment with total power consumption ratings of more than
300 watts can create a fire or shock hazard.
Mains Power Cord
Connect to 120V AC power source. This cord is fitted with a standard two-prong power plug
with an integral large ground pin. For your safety, we have incorporated a three-wire line
(mains) cable with proper grounding facilities. It is not advisable to remove the ground pin
under any circumstances. If it is necessary to use the equipment without proper grounding
facilities, suitable grounding adapters should be used. Less noise and greatly reduced
shock hazard exists when the unit is operated with the proper grounded receptacles.
14
6
15
16
17 20
Advertisement
