Table of Contents
Advertisement
Section 2 - Installation
3.
Connect the headset to the headset port on the left side of the phone. (optional)
IP Network
4.
Connect an Ethernet cable to the LAN port on the phone and connect the other end to an Ethernet Switch port that is linked to an IP network
(see figure above).
5.
Connect an Ethernet cable to the PC port on the phone and connect the other end to a Notebook or PC. (optional)
6.
Connect the external power adapter to the phone. For the DPH-400SE, if your Ethernet switch supports PoE (Power over Ethernet), the phone
can be powered through the LAN port, so there is no need to connect the power adapter.
7.
Finally, connect the power adapter to a power outlet.
D-Link DPH-400S(SE) User Manual
15
Hide quick links:
Advertisement
Table of Contents
