Microsoft Internet Explorer; Connecting The Video Server - Eneo GLS-2302H Operating Manual

6.1 Microsoft Internet Explorer

6.1.1 Connecting the Video Server

. Start up the Microsoft Internet Explorer, and then follow the steps below to connect the Video Server.
. Click the URL block at the top of the window.
. Enter the URL address of the Video Server into the URL block and press the „Enter" button to enter the home page.
4. Now the page headlined „Enter Network Password" will appear.
5. Enter the „User Name" and „Password" in the appropriate spaces.
6. Click the „OK" button to set your entries, and automatically exit the page.
NOTE: The default „User Name" and „Password" are admin and 9999 respectively.
NOTE: The page headlined „Enter Network Password" is shown below. Please enter the user name and
password of the Video Server when you see it. If either the user name or the password is incorrect,
please check the input data and rectify it if and as necessary.
NOTE: Once authorized successfully, the login page will not appear again until you close the window and
reconnect it.
NOTE: The initial sequence of proceeding is to type in your IP address and click the „Enter" button to access
the home page. If and when you revise or change data in the „SYSTEM USERS" page, the sequence will
alter to initially show the „Enter Network Password" page.