Download Print this page

Pyle PLTTB9U Instructions page 4

Usb/sd belt drive turntable player

Advertisement

1.
TIPS FOR BETTER PERFORMANCE
1. When opening or closing the turntable cover, handle it gently, moving it either at the center or
equally from both sides.
2. Do not touch the stylus tip with your fingers; avoid bumping the stylus on the turntable mat or a
record's edge
3. Clean the stylus tip frequently, using a soft brush with a back-to-front motion only.
4. If you use a stylus cleaning fluid, use it very sparingly.
5. Wipe the dust cover and turntable housing gently with a soft cloth. Use only a small amount of
mild detergent solution to clean the turntable and dust cover.
6. Never apply harsh chemicals or solvents to any part of the turntable system.
7. Prior to moving the turntable, always unplug it from the AC outlet and fasten the tone arm on
the tone arm rest with the vinyl twist-tie.
o
MAINTENANCE AND CARE
Caring for the player
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
The maximum ambient temperature: 35 "C
Electronic products of this kind shoblld never be subjected to extreme temperatures or high humidity.
For instance, this set should not be placed in bathing areas of around stoves and radiators.
If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before
operating it any further.
Cleaning the Unit
To prevent fire or shock hazard, disconnect your unit from the AC power source whcn cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
Inclination
Do not install the unit in a inclined position, It is designed to be operated in a horizontal position only.
Condensation
If the unit is brought directly from a cold to a warm location, moisture may condense inside the player,
and cause damage it. When you first install the unit, or when you move it from a cold to a warm
location, wait for 30 minutes before operating the unit.
Disconnect Power
If you are not going to use the player for long time, be sure do discounect the player from the AC
power source.

Advertisement

loading