Sony Handycam FDR-AX1 Operating Manual page 34

When the CH1 switch is set to INT MIC
Input source and recorded
channel
INT MIC (L)
INT MIC (R)
INT MIC (mono)
INPUT 1
INT MIC (mono)
INPUT 2
When the CH1 switch is set to INPUT 1
Input source and recorded
channel
INPUT 1
INT MIC (mono)
INPUT 1
INPUT 1
INPUT 2
• When the CH1 switch is set to INPUT 2, the
INPUT 2 source is recorded to CH1.
• When you use a stereo microphone (2 XLR
plugs), connect the L (left) channel plug to the
INPUT 1 jack, and the R (right) channel plug to
the INPUT 2 jack. Set the CH1 switch to
INPUT 1, and the CH2 switch to INPUT 2.
Adjusting the volume
When both the CH1/CH2 switches are set to INT
MIC, left and right channels are linked to the CH1
switch and dial.
1.
Set the AUTO/MAN switch (F or I) of
the channel to be adjusted to MAN.
appears on the LCD screen.
34 Changing Basic Settings
2.
CH2
switch
setting
To restore automatic adjustment
Set the AUTO/MAN switch (F or I) of the
CH1
manually adjusted channel to AUTO.
CH2
Setting the headphone sound
CH1
CH2
CH1
CH2
CH2
You can select the channel by setting the switch
switch
to CH1 or CH2, to output from the headphone.
setting
See "Headphone Out" in "Audio Output" of
Audio menu on the sound at STEREO MIX
(page 44).
CH1
CH2
CH1
CH2
CH1
CH2
During recording or standby, turn the
AUDIO LEVEL dial (G or H) of the
channel to be adjusted.