Picture Menu - HP mp2220 Series User Manual

Picture menu

Some picture adjustments are available only when certain input ports are in use. Unavailable
adjustments are shown in gray in the on-screen menu.
Picture menu
Color settings...
Brightness
Contrast
Sharpness
Color saturation
Tint
Color space
Reset color settings
VGA settings...
Auto-sync
Frequency
Tracking
Vertical offset
Horizontal offset
Picture mode
Customize picture mode... Changes settings associated with the current picture mode.
Picture enhancement
White intensity
Color temperature
38 Adjusting the Projector
Adjusts the picture and colors.
Brightens or darkens the picture.
Sets the difference between light and dark areas.
Sharpens or softens the picture.
Adjusts the intensity of colors.
Shifts colors toward red or green.
Selects the color standard used by the source.
Restores these color settings to the default settings.
Adjusts settings for a computer input.
Resynchronizes the projector to the input signal. This can compensate for
any change in the signal.
Adjusts the timing of the projector relative to the computer.
Adjusts the phase of the projector relative to the computer.
Adjusts the picture up or down within the projection area.
Adjusts the picture left or right within the projection area.
Adjusts color and picture settings to one of several combinations designed
for different types of viewing situations. You can use a different picture
mode for each source or each viewing environment. You can also customize
each picture mode.
Refines the color, lightness, and other characteristics of the picture.
Increases the brightness of white areas.
Shifts color toward red or blue.