15. Remove the rear No. 2 floor board
sub-assembly.
(1)
Disengage the 2 claws and 2 clips, and
remove the rear No. 1 floor board
sub-assembly.
16. Remove the rear No. 1 floor board.
(1)
Remove the bolt.
(2) Disengage the 2 claws and 2 clips, and
remove the rear No. 1 floor board.
17. Remove the deck trim side panel assembly
RH.
(1) Using a screwdriver, disengage the claw
and remove the tonneau cover holder cap.
23