13. REMOVE FRAME WIRE
Caution:
Wear insulated gloves.
Notice:
Insulate the terminals of the removed frame
wire with insulating tape.
(1)
Remove the 2 nuts, then disconnect the frame
wire from the hybrid battery junction block
assembly.
(2)
Disconnect the clamp and frame wire.
14. REMOVE NO. 7 HYBRID VEHICLE
BATTERY UPPER CARRIER BRACKET
(1)
Disconnect the 2 wire harness clamps.
(2) Remove the bolt and No. 7 hybrid battery
upper carrier bracket.
15. REMOVE HV BATTERY
Caution:
Wear insulated gloves.
Notice:
Since the HV battery is very heavy, 2 people are needed to remove the HV battery.
When removing the HV battery, do not damage the parts around it.
(1)
Disconnect the connector and electrical key
oscillator clamp.
24