Table of Contents
Advertisement
Load Balance Broadband Router
3.
After a successful login, the main page will appear as the following figure, and you
can configure the function by clicking the setup menu on the left side of the screen.
412
WAN/LAN Ports Configuration
TL-R480T+ provides three adjustable WAN/LAN ports which can work in WAN mode or
LAN mode. By the factory defaults, it is set to Dual-WAN mode with port 1 and port 2
as WAN ports, while port 3~5 are LAN ports. Ports are identified as WAN or LAN on the
front panel's LEDs. The port works in WAN mode when the LED "Link/Act" is yellow,
and works in LAN mode when the LED "Link/Act" is green. To set the WAN/LAN ports,
please follow the steps:
1.
After a successful login, choose menu "
2.
Select the total number of WAN ports on the following screen according to your
demand.
Note: The Router will adjust the physical ports according to the specified number of
WAN ports, which is illustrated by the port sketch on the configuration screen. In the
web UI, the red color indicates that the port works as a WAN port while green color
indicates the LAN port.
17
Configuration
Figure 5-4
Main Page of the Router
Network→ WAN/LAN Number".
Figure 5-5
WAN Mode Setting
Advertisement
Table of Contents
