Running Fileattrs; How Fileattrs Works - 3Com Traffix Transcend Traffix Manager User Manual

Running fileattrs

How fileattrs Works

Configuration File Example 2
To assign user and operating system information to devices based upon
their address:
*KEY:2
*ATT:NL Type, NL Address, User, O/S
IP, 104.240.20.10, Joe Bloggs, Solaris 2.5
IP, 104.240.20.8, Joe Bloggs, Windows 95
IP, 104.240.20.13, John Smith, Solaris 2.5
IP, 104.240.20.14, General Use, AIX 4.1
If the discovered device has the NL Type IP and an NL Address of
104.240.20.13, this matches the key fields of the third entry and assigns
values to the User (John Smith) and O/S (Solaris 2.5) attributes.
The user can have many different configuration files, each running with
its own copy of fileattrs and so with its own entry in the
user-defined attribute configuration file. The configuration file should be
passed at the parameter to fileattrs.
For example, if two configuration files — COUNTRY.TXT and
MACHINEINFO.TXT — were contained in c:\data, then you could add
the following two lines to the user-defined attribute configuration file:
Country fileattrs.exe c:\data\country.txt
machineinfo fileattrs.exe c:\data\machineinfo.txt TRUE
Attributes would then be assigned to devices based on the contents of
these two configuration files.
If you change the contents of the configuration file, then you must restart
the Traffix Manager Server for your changes to take effect. If fileattrs
detects a syntax error in the configuration file, the Traffix Manager Server
stops. You can view any error message in the Event List.
When a device is discovered, fileattrs does the following:
1 It finds the KEY attribute(s) for that device, and sees if it matches any of
the entries listed in the file. If it does, then it assigns the appropriate
values for the attributes listed in ATT to that device.
2 The special attribute value '*' matches any attribute in the key column.
If no matching entry is found in the configuration file for a particular
device, no attributes are assigned.
Using the fileattrs Program
TRUE
141