Segment Activity Report - 3Com Traffix Transcend Traffix Manager User Manual

Segment Activity
Report
This report contains detailed information on each specified segment. For
the purposes of reporting, it is assumed that each separate segment of
your network is monitored by an agent interface.
Many sites (particularly in a switched environment) have large numbers of
segments and it may be too expensive to instrument all of them with
RMON-2 agents. One option at such sites is to use any existing,
embedded RMON-1 only devices (hubs, switches, routers etc.) to produce
lightweight Segment Activity reports for the otherwise un-instrumented
segments. See Appendix
information.
v
Table 11 Segment Activity Report Charts
Report
Section Chart Title
1 Segment
Activity
1.1 Protocol
Distribution Of
Segment By
Octets
Top Hosts
Protocol
Distribution By
Octets With
Packets Overlaid
Utilization
History With
Baseline
(continued)
I, "Using RMON-1 Agents"
Description
A pie chart showing the top 10 protocols seen on the
segment.
A stacked bar chart showing the top 10 hosts on the
segment by total octets sent and received. The octets
are broken down by protocol.
A stacked bar chart showing the octets over the report
time period broken down by protocol. The left hand axis
refers to the octet totals. The right hand axis refers to
the packet totals, shown as a line.
A baseline chart showing the actual utilization over the
report period as a line. This is overlaid on bands
representing normal, borderline and unusual utilization.
These baselines are calculated using a statistical analysis
of data from previous report periods.
Note that baseline information does not appear
immediately. You may need to generate historical data
for several weeks before the baselines can be calculated.

Segment Activity Report

for more
103