Step 1 - Unpack The Scale - Detecto 7550 Installation And Operation Manual

Step 1 – Unpack the Scale
IMPORTANT:
SHOULD BE PERFORMED BY TWO PEOPLE. PLEASE READ THROUGH THE
INSTRUCTIONS CAREFULLY BEFORE STARTING TO INSTALL THE SCALE.
NOTE: Make certain the scale has been received in good condition. Check for any damage
incurred in shipping. If scale has been damaged, place a claim with the carrier. It is the
responsibility of the purchaser to file all claims for any damages or loss incurred during transit.
Keep the carton and packing material for return shipment if it should become necessary.
1. Cut the shipping straps and remove the shipping carton top to unpack the scale.
2. Remove the boxes containing the Wall Mount and Weight Indicator from the shipping carton.
Leave this strap until
instructed to remove!
3. Remove all packing material.
4. Cut the tape securing the flaps on one end
of the carton and with an assistant, slide
the scale out of the carton.
NOTE: When the scale is out of the
carton, DO NOT lift the scale by the
strap securing the weighing platform
to the scale frame to raise the scale
to the upright position.
0065-0647-0M Rev A  7550 FOLD-UP STATIONARY SCALE
UNPACKING AND INSTALLATION OF THIS PRODUCT
NOTE: Leave the strap securing
the Weighing Platform to the
Scale Frame until instructed to
remove it in "Step 4 – Install the
Scale on the Wall Mount".
DO NOT lift scale by this strap!
Wall
Mount
Weight
Indicator
Cut
Tape
5