Step 6 - Scale Operation - Detecto 7550 Installation And Operation Manual

Step 6 – Scale Operation
1. With the weighing platform in the closed
(stored) position, grasp the top edge of the
platform and pull it down into the operating
position.
2. With the weighing platform in the operating position, press the
indicator on.
3. When the indicator reads Zero, place the em
TARE the wheelchair weight if desired.
4. Position the patient on the weighing platform by
Do Not push the wheelchair on or off the we
DANGER: Never PUSH the wheelchair ont
Always PULL the wheelchair onto and off th
patient could occur!
0065-0647-0M Rev A  7550 FOLD-UP STATIONARY SCALE
10
ON/OFF key to turn the
pty wheelchair on the weighing platform and
pulling the wheelchair onto the platform.
ighing platform.
o or off the weighing platform!
e platform. Serious injury to the
Direction
of Travel