Scale Assembly - Detecto 337 Owner's Manual

The Detecto Physician's Eye-Level Beam Scale comes partially assembled. The following
components require assembly:
Column
Draft Rod
Height Rod
Wheels
Tools required:
Phillips head screwdriver
Wrench (included)
1. Set the scale base on a table or other assembly area free from traffic and obstructions.
2. Remove the cable tie that secures the draft rod during transit (shown in Figure 1).
Draft Rod
Figure 1. - Remove cable tie securing draft rod in column
3. Insert the column onto the scale base (shown in Figure 2), ensuring that the DETECTO
logo on the weight beam faces the scale base.
Column
8525-0374-0M Rev A Physician's Scale Owner's Manual

SCALE ASSEMBLY

Figure 2. - Insert column onto scale base
Cable Tie
Scale Base
3