Alpine Multimedia Manager PXI-H990 Owner's Manual page 85

Using the multi-channel function
PCM Output Settings (PCM OUT MODE) (continued)
7
Press 1 ( ) or 5 ( ), select the desired mode,
then press 2 (ENT).
PCM STEREO
Neo:6 CINEMA
PCM STEREO : 2ch output (L/R)
PCM 3ch
PL II MOVIE
PL II MUSIC
Neo:6 MUSIC : PCM sources are decoded in
Neo:6 CINEMA : PCM sources are decoded in
• When PL II MUSIC is selected, refer to "When
"PL II MUSIC" is selected" on page 83.
• When Neo:6 MUSIC is selected, refer to "When
"Neo:6 MUSIC" is selected" on page 86.
• The subwoofer output when PL II or Neo:6 is
selected when SMALL is set for the front
speaker (see page 55).
8
Once the settings are completed, press and
hold F SETUP for at least 3 seconds.
•
• Press 6 (RTN), or RETURN on the remote control in
the setting mode to return to the previous item.
82
-
EN
PCM 3ch PL II MUSIC
Neo:6 MUSIC PL II MOVIE
: 3ch output (L/R/Center/Rear
Center)
: Suits the stereo TV shows
and movie programs
encoded in Dolby Surround.
It improves the sound field
directivity to near that of
discrete 5-channel sound.
: Can be used for all stereo
music recordings, and
provides a wide, deep sound
field.
such a way as to achieve a
6-channel-like "3D" sound
field. This setting is suited for
playing music.
such a way as to achieve a
6-channel-like "3D" sound
field. This setting is suited for
playing movies.
Supplement
PCM SELECT
PCM STEREO
PCM 3ch
Dolby PLII MUSIC
Dolby PLII MOVIE
DTS Neo:6 MUSIC
DTS Neo:6 CINEMA
See page 90 for supplementary information.