Specifications; General Specifications; Printer Specifications; Operating Conditions - SANEI ELECTRIC ?TP-5820A Instruction Manual

Specifications

1. General specifications

1-1. Printer specifications

Printing method:
Type of character:
Character configuration: 7 x 5 dot matrix
Input character code:
Data input method:
Printing direction:
Service life:
Weight:
Model name
ƒÊ TP-5820A
ƒÊ TP-5824A

1-2. Operating conditions

Operating voltage:
Power consumption:
Working temperature:
Storage temperature:
Allowable humidity:
About the power supply:
The ƒÊTP power supply standards are as specified above. Consider an instantaneous
maximum current of 3.0A during printing. (+5V-VP, Vcc, GND¥ four lines)
When sharing the power supply with the host system, take measures to avoid possible system
problems due to instantaneous voltage drop (A significant transient voltage drop can be
estimated).
Thermal-sensitive serial dot printing
Conforms to JIS-C6220, extended ASCII version (available with
katakana), alphabetic characters (uppercase, lowercase), numeric
figures, kana, symbols, and the like for 250 types in total
JIS 8-bit code (See the code table.)
Conforming to Centronics standards. (Refer to the data timing).
Left -> right with regard to the paper feeding direction.
500,000 lines
About 490 g (including the roll paper and the main body fitting).
Character
dimensions (in mm)
2.4•~ 1.5
2.4•~ 1.3
+ 5Vdc •} 5%
At operation: No more than 3.0A (instantaneous maximum value
during printing)
At wait: About No more than about 50 mA
0 to + 50•Ž
-40 to + 60•Ž
40•Ž 85%
Number of character
digits (digits/line)
20
2-dot space
24
2-dot space
15
Printing speed
(lines/sec.)
About 0.8
About 0.8