SANEI ELECTRIC ?TP-5820A Instruction Manual page 13

LF
[Name] Printing-paper feeding
[Code]: <0A> H or <10>D
[Function]: Prints data in the printer buffer and feeds paper.
[Operation]: When no data is found in the printer buffer, paper is fed only.
CR
[Name] Printing/paper feeding
[Code] <0D>H or <13>D
[Function] Prints data in the printer buffer and feeds paper.
[Operation] When data preceding <CR> is not found, nothing is done,
When data + <CR> + <LF>, prints data + <CR>, and <LF> is ignored.
SO
[Name] Double-size enlarged printing mode specification
[Code] <0E>H or <14>D
[Function] With the code entered, data is printed in double-size enlarged characters.
SI
[Name] Double-size enlarged printing mode reset
[Code] <0F>H or <15>D
[Function] Resets the double-size enlarged printing mode by entering the code.
[Example of coding]
Lprint chr$(14);" ABC"; chr$(15);" DEF";chr$(13)
Enlarged size characters (7 x10)
CAN
[Name] Cancel
[Code] <18>H or <24>D
[Function] Clears all the data stored in the data buffer and waits for the next data entry.
[Operation] When SO, SI, ESC+"S" + n1n2n3n4 has been entered in the data buffer, the
function is cleared. However, ESC +"c",
operation when this command is entered, it is not entered in the data buffer,
so that the previous state is not resumed even when a CAN code has been
entered.
‚`‚a‚b ‚c‚d‚e
10
Ordinary size characters (7 x 5)
ESC +"R" + n performs a flag