Maintenance - SANEI ELECTRIC ?TP-5820A Instruction Manual

Maintenance

CAUTION
When the printer surface is contaminated, wipe off the contaminant with a dry soft cloth. If
the contamination is severe, immerse a soft cloth in water containing a small amount of a
neutral detergent. Wry the water out of the cloth well and wipe the printer surface with it.
Then, wipe the surface with a dry cloth.
Cautions:
•
Do not use a volatile chemical agent such as thinner, benzene, etc.
•
Never moisten the internals of the printer with water, etc.
When holding the printer, take the fullest care while handling it.
14