Advertisement
User Manual – LUX LD30W
150.447UK
9.
General Maintenance :
To maintain optimum performance and minimize wear, fixtures should be cleaned frequently. Usage
and environment are contributing factors in determining frequency. As a general rule, fixtures should be
cleaned at least twice a month. Dust build-up reduces light output performance and can cause
overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure to power off
fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust collected
on external vents and internal components. Clean all glass when fixture is cold with a mild solution to
the cloth or tissue, and drag dirt and grime to the outside of the lens. Gently polish optical surface until
they free of haze and lint.
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequently depends on the environment in which the fixtures operates:
damp, smoky or particularly dirty surroundings can require cleaning fluid. Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
10.
Mounting instruction :
The fixture may be mounted in any position provided there is adequate room for ventilation.
It is important never to obstruct the fan or vents pathway. Mount the fixture using a clamp.
Adjust angle of the fixture loosening both knobs and tilting the fixture. After finding desired
position, retighten both knobs.
When selecting installation location, take into consideration lamp replacement access and
routine maintenance. Safety cables must always be used.
Never mount in places where the fixture will be exposed to rain, high humidity, extreme
temperatures changes or restricted ventilation.
4
Advertisement
