Fujitsu Plasmavision PDS4208W-B User Manual page 36

When rotating text (for installing the display with one of its sides
facing down)
• Rotating text (OSD rotate)
You can use this option to rotate the text.
Each time you press or , one of the available choices appears in the following sequence:
-90 Deg. Normal
-90 Deg.: Displays text from left to right when the display is installed with the power indicator
lamp at the top.
Normal: Displays text normally.
+90 Deg.: Displays text from left to right when the display is installed with the power indicator
lamp at the bottom.
When selecting automatic switching to desired mode
• Input mode of priority (Input priority)
You can use this option to switch between modes only when a signal is received through the
selected input mode terminal. You cannot switch the input mode.
Each time you press or , one of the available choices appears in the following sequence:
Off Video S-video
Off: Switches between modes normally.
Other modes: Displays images when a signal is received through the selected input mode
terminal.
* You cannot select the currently selected mode.
You cannot switch between input modes when you have selected a mode with this option.
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, : S-video mode,
V S
+90 Deg.
Comp.video RGB
: Comp.video mode, : RGB mode
C R
All modes
All modes
35