Fujitsu Plasmavision PDS4208W-B User Manual page 11

PART NAMES AND FUNCTIONS (Continued)
Bottom
1 Main power switch
Press this switch when the power is OFF to turn it ON. When you do so, the power indicator lamp will become red, indicating that
you can turn ON or OFF the power to the display using either the remote control or the display's control panel.
Press this switch when the power is ON to turn it OFF.
2 RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. 14.)
* No RS-232C cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your
dealer for more information.
3 RGB input terminal (RGB INPUT/mD-sub)
Connect this terminal to the PC's display (analog RGB) output terminal.
* No RGB cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your dealer
for more information.
4 RGB synchronization switch (SYNC SW TTL/ANALOG (75 Ω))
This switch is used to terminate pins 13 and 14 of the RGB terminal with 75 Ω respectively for receiving horizontal (H) and vertical
(V) synchronization signals.
TTL:
ANALOG (75 Ω): Used when sending analog synchronization signals to the RGB terminal
5 Component video input terminal (COMPONENT VIDEO INPUT)
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
When connecting a cable, attach a ferrite core to the cable. (See P. 14.)
6 S-video input terminal (S-VIDEO INPUT)
Connect this terminal to the S-video output terminal of your VCR or video disk player.
7 Video input terminal (VIDEO INPUT)
Connect this terminal to the video output terminal of your VCR or video disk player.
8 Power input terminal
Connect this terminal to the power cable supplied with the display.
10
2 3 4
Used when sending RGB signals from the PC to the RGB terminal
5 67
1
8