Fujitsu Plasmavision PDS4208W-B User Manual page 12

Description of Input Terminals
RGB input terminal (RGB INPUT/mD-sub)
RS-232C terminal (RS-232C)
Pin No. Input signal Pin No.
1 Red 9
2 Green 10
3 Blue 11
4 — 12
5 Ground 13
6 Ground 14
7 Ground 15
8 Ground Frame
* Use the RGB synchronization switch to switch between TTL and ANALOG
depending on the types of horizontal (H) and vertical (V) synchronization signals
received through pins 13 and 14, respectively.
Pin No. Signal
1 DCD (Data Carrier Detect)
2 RD (Received Data)
3 TD (Transmit Data)
4 DTR (Data Terminal ready)
5 GND (Ground)
6 DSR (Data Set Ready)
7 RTS (Request To send)
8 CTS (Clear To Send)
9 RI (Ring Indication)
Input signal
—
Ground
—
—
Horizontal (H) synchronization
Vertical (V) synchronization
—
Ground
11