Boiler Set-Up - PEERLESS Pinnacle PI-399 Installation And Operation Manual

BOILER SET-UP

2. BOILER SET-UP
A. GENERAL
1. Pinnacle boilers are to be installed in an area with a
floor drain or in a suitable drain pan. Do not install
any boiler where leaks or relief valve discharge will
cause property damage.
2. This boiler is not intended to support external piping.
All venting and other piping should be supported
independently of the boiler.
3. Install this boiler level to prevent condensate from
backing up inside the boiler.
CAUTION
This boiler must be installed level to prevent
condensate from backing up inside the boiler.
4. An optional boiler stand is available for Pinnacle
boilers. Two part number 91439 boiler stands are
required for the PI-399.
4