Chapter5. OPERATION THE STANDING AND SITTING
1. First, adjusting and fixed the knee support to suit position and make sure the two triangular form of
knee support lock to the double-head screws of frame. (Fig-30 & 31)
2. Fixed the safety belt.(Fig-32)
3. Fixed the chest belt.(Fig-33)
4. Pull upward(push forward) the handle of controller the wheelchair is operated for
standing up.
5. Push downward(pull backward) the Handle of controller the wheelchair is operated for sitting
down.
Note:
● Please make sure your hand not under the stand up mechanism.
● Make sure not children in the wheelchair back.
30
32
31
33