● After loosening the screws the Footrest height can be adjusted using the different holes at 1.8cm
distance.
● Retighten the screws.(not too tight)
3-4. Adjusting the Footrest Angle
● After release the screws the footplate angle can be adjusted using the different hole at 10° incline
angle. (Fig-17 & 18)
● Retighten the screws.(Fig-19)
3-5. The Knee Support and Safety Belt and Chest Belt
The most important safety features of the stand-up wheelchairs are the knee
support & safety belt and chest belt. It is absolutely essential that these be correctly
in place before you attempt to stand up.
15
17
18
16
19