Technical Presentation - XTZ 80 CENTER User Manual

Technical presentation

Cabinet design
The XTZ 80 CENTER is a loudspeaker designed especially
for using as the centre channel in the XTZ 80 system. It
works however fine when used together with other front
speakers.
XTZ 80 Center is magnetically shielded so that you can
place it near a TV set without interference. The shape of the
cabinet is also optimized for placement on a shelf above or
below the TV set.
Apart from the shield it works just like any "normal"
loudspeaker, thus it may be used as a satellite/monitor
speaker as well. It works just as fine when standing as when
lying.
The cabinet is built in strong MDF, which provides good
sonic qualities.
Tweeter driver
For tweeter we have choosen a silk-made soft dome driver.
This driver have good qualities, such as a fast transient
response and a very smooth frequency graph. In short: a
very priceworthy driver.
Midrange/woofer For midrange/woofer we have chosen two 5 1/4" drivers.
driver
The driver is in coated paper and glassfibre which yields
good sonic qualities, high strength and low weight. The low
weight of the diaphragm together with the powerful magnet
yields a very high efficiency. The rubber suspensions along
with the quality damp has the benefit of providing good
sonic properties and a long life.
Crossover We have choosen a –12 dB crossover with good transient
response and a minimum of phase shiftings along with high
quality capacitors and low impedance coils. (Read more
about crossover choice on the XTZ web page.)