Lopi Liberty Owner's Manual page 30

M
AINTAINING
P 28
AGE
Baffle Removal and Replacement Instructions (continued)
All of the baffle components are removable to facilitate easy cleaning and repairs. Make sure the
appliance is cool before removing any of the components. See the instructions on the following page for
removing the secondary air tubes.
REMOVING BAFFLE COMPONENTS
1. Lift up on the
front portion of
the front three
firebricks.
2. Lift the front
baffle support
and rotate it
forward until it
can be removed.
3. Slide the center front firebrick
forward and out the door opening. Then
slide the side front firebricks towards
the middle then out in the same manner.
4. Slide the center baffle support
forward and out of the firebox.
5. Slide the rear firebrick forward and
out of the firebox. NOTE: When the
center rear firebrick are slid forward the
baffle support will come to rest on the
rear secondary air tube and rear air
channel.
6. Slide the bypass support to the left
and the bypass damper to the right so
the bypass damper seperates from the
support. Lower the bypass damper so
bypass rod disengages from the
bypass damper from the top.
7. Remove both components by sliding
them between the front two secondary
air tubes. The bypass support will need
to be rotated 90° for removal.
REPLACEMENT INSTRUCTIONS:
A. Place the bypass support above the secondary air tubes in the rear left of the firebox.
B. Position the bypass damper so the bypass rod inserts into the two tubes on the bypass damper (make sure to have
correct orientation. Then slide the bypass support under the bypass damper until both are centerd in the firebox.
C. Follow the instructions above in reverse order, starting with step number 5.
Y A
OUR PPLIANCE
SIDE VIEW
Front
Firebrick
Front Tab
Baffle Welded to
Support Firebox
(C
ONTINUED
1.
5.
6.
7.
)
2.
3.
4.
5.
6.
7.