Table of Contents
Advertisement
Pressing the Jump
Jump
button after the radio has tuned to your traffic report will return to the channel to
which you had been listening immediately prior to pressing the Jump
If the jump button is set to JumpSet, pressing the Jump
programmed channel. Pressing the Jump
you had been listening immediately prior to pressing the Jump
Note: The jump button setting remains the same regardless of which preset bank is currently
selected.
Channel Presets (P.TUNE Mode)
Searching for a Channel Preset
It is possible to quickly search through all of your presets using the Rotary Knob:
1.
Press and hold the BAND button to enter the preset tune mode (P.TUNE).
2.
The bottom right portion of the display will change to highlight the current preset num-
ber. (Figure 7)
Turn the Rotary Knob in either direction to move through the presets. The selected
3.
preset channel will begin to play as soon as you stop turning the Rotary Knob.
Only stored presets will be displayed, regardless of what bank they are stored in. Presets will
be grouped and displayed by preset bank and number (for example, A-1, A-2...B-1, B-2...C-
1,C-2...) and rotate through all the presets and return back to the beginning preset.
To exit the preset tune mode and return to Default display screen, press and hold the BAND
button.
button while the radio is searching will cancel the search. Pressing the
button will immediately tune to the
button again will return to the channel to which
figure 7
figure 7
button.
button.
[
Operation
]
1
Advertisement
Table of Contents
