Item
Sets the function to be accessed by custom key 1.
Custom Key
1
Sets the function to be accessed by custom key 2.
Custom Key
2
Sets the function to be accessed by custom key 3.
Custom Key
3
Allows the monitor settings to be set through the software
DDC/CI
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
When this function is activated, HDMI port will be in the
HDMI Auto
input auto select loop. Otherwise, HDMI can only be
Switch
(for models
selected by input select or by hot key.
with HDMI
inputs)
Sets the time to power off the monitor automatically in
Auto Power
Off
power saving mode.
Sets whether to display the resolution notice of the
Resolution
Notice
recommended resolution when a new input source is
detected by the monitor.
Displays the current monitor property settings.
Information
Resets all mode, color and geometry settings to the
Reset All
factory default values.
Function
Range
• Picture Mode
•
Low Blue Light
•
Display Mode
•
Brightness
•
Contrast
•
Auto
Adjustment
•
Volume
•
Mute
•
Input
•
ON
•
OFF
•
ON
•
OFF
•
OFF
•
10min.
•
20min.
•
30min.
•
ON
•
OFF
• Input
• Current
Resolution
•
Optimum
Resolution
(best with the
monitor)
•
Model Name
•
YES
•
NO
Navigating the main menu
37