How to Use
Setting and Using the Water Heater
DANGER
Hot Water Heater temperatures over 125°F can cause
severe burns instantly or death from scalding.
•
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, ask professional person.
• When setting the unit to 125°F or higher, the temperature
display will flash for 10 seconds and emit a tone as a high
temperature warning.
• Take caution when using the unit again after setting to 125°F
or higher. Always check the set temperature before use.
• Do not allow anyone to change the water temperature while
hot water is running.
12
2
1
To prevent scalding:
High Temperature
(Starting with the Power Off)
1
Press the Power
On/Off Button.
On
The temperature will be
displayed on the remote
control thermostat.
On
Previous set
temperature
(Ex.: 110°F)
Remote Controller Display
Flashes for 10 sec