Triadis Engineering Glide Computer and Navigation System Owner's Manual page 8

Accessories
Additional equipment not supplied
Available accessories (not included with base unit except where
specified):
Part number
T254-900
T253-900-XXX
T254-901-XXX
SubD15w+H
Patch1mH
Patch2mH
Patch3mH
Altair-Mnt-L
Altair-Mnt-R
Stick grips with switches and buttons are available from third party
manufacturers. Your Triadis Engineering representative can pro-
vide advice on options.
The user may need to supply the following additional parts, not
supplied in the Altair retail pack, to complete the installation:
Laptop/PC for installation of software updates and data files.
USB memory stick
Aircraft-grade wiring
Airframe, instrument panel or control stick switches
Designation
Altair wiring harness (Altair-WH-A)
1-Wire temperature and humidity sensor for
Altair or Vega
1-Wire 8 port digital input node to connect ex-
ternal switches, buttons and other sensors to
Altair or Vega
Sub-D plug, 15 pole, with hood (to bare leads)
Cable connection to FLARM/Vega (1m patch-
cable grey 8 pole, halogen-free)
Cable connection to FLARM/Vega (2m patch-
cable grey 8 pole, halogen-free)
Cable connection to FLARM/Vega (3m patch-
cable black 8 pole, halogen-free)
Left-handed Altair mounting brackets
Right-handed Altair mounting brackets
8