Preparation Of Usb Memory Stick - Triadis Engineering Glide Computer and Navigation System Owner's Manual

SD card
MMC card

4.2 Preparation of USB memory stick

PWR
NAV
DISP
CFG
INFO
USB combo drive
PDA
To perform software and database updates and to download files
from Altair to the USB memory stick, follow the instructions be-
low:
First prepare the USB memory stick (usually this only has
to be performed once).
Create a directory on the USB memory stick
\ToAltair
Place any files for installation in that directory. Only files
required by XCSoar or Altair are uploaded, files of unknown
formats are ignored. The directory name is case sensitive.
Create a directory on the USB memory stick
\FromAltair
Files downloaded from Altair will be copied into this direc-
tory if it exists. If the directory does not exist, no downloads
will be performed. The directory name is case sensitive.
The XCSoar program as well as AltairSync itself can be upgraded.
The proper file name convention for these files are:
XCSoarAltair-YYY-CRCZZ.exe
Altair
Computer
28