Cleaning Old Files - Triadis Engineering Glide Computer and Navigation System Owner's Manual

care must be taken when installing upgrades to the XCSoar and
AltairSync programs. Should a corrupted file transfer take place
and if AltairSync is unable to recover, Altair may be rendered in-
operable and require repair by an technician authorised by Triadis
Engineering.
When the AltairSync and XCSoar programs are being updated,
the utility performs CRC error checking on the file transfer; in
the event of failure, the system reverts to the old version of the
program.
After new files are installed or if old files are removed, the config-
uration of XCSoar may need to be adjusted. This can be accessed
via the menu:
CONFIG Setup system
When uploading files from the USB stick to Altair, the user is
asked whether files on the USB stick should be deleted after a
successful upload.
4.4 Cleaning old files
AltairSync will start on power-on if Altair detects that the storage
memory is nearly full, in order to allow the user to clean up old
files to free up space on the device. If the USB memory stick is
inserted at start up but the user declines to perform upload when
asked, it will then ask if the user wants to enter the file cleanup
mode.
When file uploads are being performed, if the system detects that
there is insufficient storage to complete the transfer, then this too
will cause the system to enter the file cleanup mode.
30