Add An Ipad - Sonos Multi-Room Music System User Manual

Chapter 2: System Setup
Tap the Sonos
2.
System.
If you should need assistance while setting up your Sonos system using an iPhone or iPod touch, you can go to our Website at
http://faq.sonos.com/icr.
For additional information about the use of your Sonos Controller, see Sonos® Controller for iPhone on page 6-1.

Add an iPad

™
The Sonos Controller for iPad application turns your iPad into a full-fledged Sonos Controller. You simply need to have an iPad
connected to your wireless router, and at least one ZonePlayer set up. (iPads and Sonos ZonePlayers are sold separately.)
Note: To use the Sonos Controller for iPad, it must be connected to your wireless network and the
Wi-Fi setting must be set to On. If you need to make changes to your wireless connection, you can
select Settings > Wi-Fi from the Home screen on your iPad. For additional help with this step, refer to
the manual that accompanied your iPad (http://support.apple.com/manuals.)
Download the Sonos Controller for iPad application. You can either touch the App Store icon on your iPad, or you can
1.
download it from iTunes— if you download the Sonos Controller from iTunes, you need to sync before you see the Sonos logo
display on your iPad.
Touch the Sonos
2.
System.
• If you are adding a ZoneBridge, you will be prompted to press and release the Connect button on top of the ZoneBridge. If
you are adding a Wireless Dock the Connect button is located on the back of the dock. The indicator lights will flash green
and white while the ZoneBridge is connecting.
• If you are adding a ZonePlayer, you will be prompted to press and release the Mute and Volume Up buttons simultaneously
icon and then follow the prompts to add the Sonos Controller for iPhone to your Sonos Multi-Room Music
icon and then follow the prompts to add the Sonos Controller for iPad to your Sonos Multi-Room Music
2-11