Using Headphones; Clock And Alarms - Sonos Multi-Room Music System User Manual

Chapter 8: Sonos Controller for PC

Using Headphones

The ZonePlayer S5 has a headphone jack you can utilize for private listening. The headphone jack is auto detecting - plug in a pair
of headphones and the ZonePlayer S5's built-in speakers automatically mute. When you unplug the headphones, the speakers
automatically come back on.
When headphones are plugged in, a headphone indicator
Group settings.) If you adjust group volume, the volume in the zone with headphones attached will be unaffected.
For additional information, see "Using Headphones" on page 2-16.

Clock and Alarms

This section discusses how to use the clock and alarms features on your Sonos Controller for PC. For help using the Sonos
Controller 200, go to "Clock and Alarms" on page 10-17.
Setting date and time
From the Zones menu, select Clocks and Alarms.
1.
Click the Date and Time button.
2.
Choose one of the following options:
3.
• Select your time zone, desired time format, and date format, and then click OK.
• Select the Select the date and time from the Internet radio button, and then click OK.
• Select the Set the date and time manually radio button. Make your selections from the displayed fields, and then click OK.
Adding an alarm
From the Zones menu, select Clocks and Alarms.
1.
Click New.
2.
Choose the desired settings for this alarm, including the alarm time, the zone you would like the alarm to play in, the music
3.
source you'd like to play from, the frequency of the alarm, and the volume and duration settings.
Note: If the music you've selected is not available (such as an Internet radio station that has
dropped off), your alarm will play the Sonos chime instead.To stop the chime, you can press Pause.
• If you check Include linked zones, the alarm will play in the zones that are linked together at the time the alarm goes off. It
does not play in the zones that were linked when the alarm was originally added to the Sonos system.
• If you check Shuffle music, the play mode for the selected alarm music will be set to shuffle.
Mute
1.
From the Zones pane, click to highlight the zone you want to mute.
2.
Choose one of the following options:
•
Click the Mute button. To unmute, click the Mute button again.
•
From the Play menu, click Mute Zone. To unmute, click Unmute
Zone.
Mute all zones
You can temporarily mute all of your ZonePlayers at any time. The track
will continue to progress, but there will be no sound emitted.
•
To mute all the zones in your household, click Mute All Zones from
the Play menu.
•
To unmute, click Unmute All Zones from the Play menu.
is visible on the Group Volume screen. (Click
8-3
to display Zone