Restarting Desktop Protector - Internet Security Systems RealSecure User Manual

Chapter 3: Setting Up RealSecure Desktop Protector

Restarting Desktop Protector

Introduction
Restarting Desktop
Protector from the
main window
Restarting Desktop
Protector from the
desktop
Restarting Desktop
Protector from the
control panel
(Windows NT)
Restarting Desktop
Protector from the
control panel
(Windows 2000)
26
You can restart RealSecure Desktop Protector after you have stopped it, or you can let
Desktop Protector restart automatically when you restart your computer.
Opening the Desktop Protector window does not make Desktop Protector resume
Note:
monitoring your system. To restart intrusion protection after stopping it manually, you
must follow one of the following procedures or restart your computer.
To restart Desktop Protector from the Desktop Protector window:
1. From the Main Menu, click Tools
Desktop Protector resumes monitoring incoming traffic. The red line disappears from
the Desktop Protector icon.
2. From the Main Menu, click Tools
Desktop Protector resumes monitoring your system for unauthorized applications
and outgoing transmissions.
To restart Desktop Protector from the desktop:
1. Right-click the Desktop Protector icon.
2. In the pop-up menu, select Start BlackICE Engine.
Desktop Protector resumes monitoring incoming traffic. The red line disappears from
the Desktop Protector icon.
3. Right-click the Desktop Protector icon.
4. In the pop-up menu, select Start BlackICE Application Protection.
Desktop Protector resumes monitoring your system for unauthorized applications
and outgoing transmissions.
To restart Desktop Protector from the Windows NT control panel:
1. Click Start Settings
2. Double-click Services.
The Services window appears.
3. Select BlackICE, and then click Start.
Desktop Protector resumes monitoring incoming traffic. The red line disappears from
the Desktop Protector icon.
4. Select RapApp, and then click Start.
Desktop Protector resumes monitoring your system for unauthorized applications
and outgoing transmissions.
To restart Desktop Protector from the Windows 2000 control panel:
1. Click Start Settings
2. Double-click Administrative Tools.
Start BlackICE Engine.
Start BlackICE Application Protection.
Control Panel.
Control Panel.