Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from the
machined surfaces of the saw. This coating may be removed with a soft cloth moistened with kerosene (do not use
acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality
household floor paste wax. Fig. 2, illustrates the components of the table saw. Fig. 3, illustrates the components of the
saw stand. NOTE: The fence system components will be illustrated in the particular instruction manual for that product.
11
6
1. Contractor's Saw
2. Blade Tilting Handwheel
3. Handwheel Lock Knob
4. Blade Guard and Splitter Assembly
5. Table Insert
6. Miter Gage
UNPACKING AND CLEANING
9
7
5
10
3
8
Fig. 2
7. Miter Gage Handle Hardware:
8. Splitter Mounting Bracket
9. Hardware (2)
10. Arbor Wrenches (2)
11. Extension Wing
6
1
2
4