Extension Cords; Functional Description; Unpacking And Cleaning - Delta 36-585 Instruction Manual

Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire
extension cord which has a 3-prong grounding type plug and matching receptacle which will accept the machine's
plug. When using an extension cord, be sure to use one heavy enough to carry the current of the machine. An
undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. Fig. D, shows the correct
gauge to use depending on the cord length. If in doubt, use the next heavier gauge. The smaller the gauge number,
the heavier the cord.

FUNCTIONAL DESCRIPTION

FOREWORD
Delta Model 36-585 is a 10" Dual Bevel Compound Miter Saw designed to cut wood, plastic, and aluminum. Bevel and
miter angle cutting is easy and accurate. It can crosscut up to 5-5/8" x 2-9/16"at the 90° position, miter at 45°, both left
and right 4-1/8" x 2-3/8", bevel at 45° left 5-7/8" x 1-9/16", bevel at 45° right 5-1/2" x 3/4", and compound 45° x 45°
4-2/16" x 3/4". It has positive miter stops at 0°, 22.5°, 31.62°, and 45° degrees both left and right, and adjustable bevel
stops at 0° and 45° left and right.
Carefully unpack the machine and all loose items from the shipping container. Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline
or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste
wax.
NOTICE:
The manual cover photo illustrates the current production model. All other
illustrations are representative only and may not depict the actual color, labeling, or
accessories and are intended to illustrate technique only.

EXTENSION CORDS

MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Rating Volts
0-6 120
0-6 120
0-6 120
0-6 120
6-10 120
6-10 120
6-10 120
6-10 120
10-12 120
10-12 120
10-12 120
10-12 120
12-16 120
12-16 120
12-16 120

UNPACKING AND CLEANING

Total Length Gauge of
of Cord in Feet Extension Cord
up to 25 18 AWG
25-50 16 AWG
50-100 16 AWG
100-150 14 AWG
up to 25 18 AWG
25-50 16 AWG
50-100 14 AWG
100-150 12 AWG
up to 25 16 AWG
25-50 16 AWG
50-100 14 AWG
100-150 12 AWG
up to 25 14 AWG
25-50 12 AWG
GREATER THAN 50 FEET NOT RECOMMENDED
Fig. D
6