Battery; Reader Error Massages - baiMobile 3000MP User Manual

Bluetooth smart card reader for apple iphone 3gs, 4, 4s and ipad 1, 2, 3, 4 and mini
Hide thumbs Also See for 3000MP:
Table of Contents

Advertisement

Battery

Your reader contains a removable, rechargeable battery. This battery is a custom battery,
built specifically for the baiMobile 3000MPReader. In the event that your reader's battery
no longer holds a charge, please contact
support@baimobile.com
for a replacement battery.

Reader Error Massages

"NO CARD!"
This is displayed when the reader is powered-on without any card inserted. This can happen
if the user uses the 'OK' button to cause power-on without a card inserted or if they plug-in
the charger to the reader without the card inserted. This indication is displayed for a few
seconds before the reader will turn itself off.
"BAD CARD"
It is displayed while the reader is powering-on with a card inserted but the reader was
unable to get the card to return an ATR (Answer To Reset) after causing card Reset.
This indication is displayed for a few seconds before the reader will turn itself off.
"LOW BATT"
It is displayed during power-on if the battery is detected as having very little power
remaining. Once the reader is finished powering-on (booting), this indication is replaced
with normal LCD indicators. This indication can only be displayed as a result of the booting
self checks. We don't quantify this threshold value in any way since it may be adjusted in
the future
17

Advertisement

Table of Contents
loading

Table of Contents